The Gladiator Series UPS is a robust and reliable Uninterrupted Power Supply system specifically manufactured for military-grade applications. Its rugged design can withstand rough environmental and electrical conditions. With its proven high efficiency, automatic voltage regulation, and hot-swappable batteries, the Gladiator series can supply up to 1500 VA of steady and clean AC power to mission-critical equipment with no downtimes. The system comes with a user-friendly interface, 5 LED indicators, and audible alarm systems to catch any errors or failures before they become costly. Additionally, Gladiator UPS is made according to the highest military standards and certification.
| OUTPUT | |
| Output Voltage Amp Capacity (VA) | 1500 |
| Output Watt Capacity (W) | 980 |
| Nominal Output Voltage | 110, 115, 120 VAC |
| Nominal Output Voltage in Battery Mode | 120 VAC |
| Frequency | 60 Hz |
| Output voltage regulation | +18% + 8% |
| Output voltage regulation in Battery Mode | +/- 5% |
| Output Receptacles | (2) MIL5015 (MS3102R16-10S) |
| Output AC Waveform | Sine Wave |
| INPUT | |
| Input Current | 12A |
| Nominal Input Voltage | 120 VAC |
| Input connector | (1) MIL5015 (MS3102R16-10P) |
| Input Phase | Single |
| Input Frequency | 60 Hz |
| VOLTAGE REGULATION | |
| Voltage Regulation | Automatic Voltage Regulation (AVR) range 75-147 VAC |
| Input 128-147 VAC | Reduced by 12% |
| Input 93-107 VAC | Boosted by 14% |
| Input 75-92 VAC | Boosted by 30% |
| BATTERY | |
| Full Load Runtime | 8 Minutes |
| Half Load Runtime | 20 Minutes |
| Battery type | Sealed Lead Acid |
| Battery Replacement | Front Mounted Hot Swappable / Field Replaceable |
| Battery replacement part number | RPS-BC-1.0T |
| USER INTERFACE | |
| RS232 | DB9 TriSense Compatible |
| USB | Optional |
| LED Indicators | 5 LEDS indicating unit status |
| Audible alarm | Alarm for power failure, low battery & overload |
| Audible Alarm Silence | Audible alarm can be silenced |
| OTHER FEATURES | |
| Bypass | Manual Bypass switch on rear of unit |
| AC Suppression | 480 J |
| AC Suppression Response Time | Instantaneous |
| Transfer time to battery | 2-4 milliseconds |
| Voltage transfer point (High / Low) | 147-75 |
| ENVIRONMENTAL | |
| Operating Temperature | +32 - 104 F |
| Storage Temperature | +5 – 122 F |
| Relative Humidity | 0-95 RH% non-condensing |
| AC Mode BTU @ Full load | 139 |
| Battery Mode BTU @ Full load | 456 |
| Efficiency @ 100% Load | 96% |
| PHYSICAL | |
| Weight | 40 lbs. |
| Dimensions (LXWXH) inches | 16.44 (17.64 including switch guard) x 6.79 x 8.77 |
| MILITARY STANDARDS | |
| Shock | MIL-STD-901D Grade A Certified |
| Vibration | MIL-STD-167-1 Type 1 Certified |
| Electrical Environment | MIL-STD-1399 Section 300 Certified |
| EMI / RFI | MIL-STD-461 Optional |
All UPSs, standard or custom, come with a full 2-year warranty on parts and labor. Well Bilt Power will, at its discretion, repair or replace any product found to be defective. Phone support is included during the 2-year warranty period.